Welcome to JINGFENG GROUP

JINGFENG GROUP

Welcome to JINGFENG GROUP

  • A1-1001, Taida Xintiandi, Nanhai Road, Binhai New Area, Tianjin, 300457, China

  • +8618920222224

  • Mail Support: graeme@humate-cn.com

  • Mon – Sat: 8:00 am – 6:00 pm (GMT+8)

Insoluble Humic Acid

Microbial Humic Granular Fertilizer – Humic Granule + Bacillus Inoculant

Key Specifications

Humic acid (dry basis) : 40.0% min
Organic matter (dry basis) : 60.0% min
pH (1:100) : 5.0 – 7.0
CERES : Certified — NOP (US) & EU Organic (2018/848)
ISO 9001 : Certified quality management system

INSOLUBLE HUMIC ACID · MICROBIAL INOCULATED GRANULE

Microbial Humic Granular Fertilizer

Humic Acid Carrier and Live Bacillus Inoculant in One Granule

Humic acid 40% min
B. subtilis 0.5×10⁸ CFU/g
Size 2–4 mm
Code JFHA-BHA-G

2–4 mm granule · 40% humic acid · B. subtilis + B. megaterium ≥0.5×10⁸ CFU/g each · spore-forming

Product Overview

Microbial Humic Granular Fertilizer combines two things that are usually bought and applied separately: a humic acid granule and a live bacterial inoculant. The leonardite granule is coated with Bacillus subtilis and Bacillus megaterium, each guaranteed at 0.5 × 10⁸ CFU/g minimum.

The logic is that each component makes the other work better. Humic acid is a carbon source and a protective matrix — it gives the bacteria something to feed on and somewhere to survive the journey from the bag to the root zone. Bacillus, in turn, is a phosphate solubiliser and a root coloniser, so it mobilises nutrients the humic fraction is holding. Applied together, survival rates are better than either applied alone into hostile soil.

Both strains are spore-forming Bacilli, which is a practical decision rather than a marketing one. Spores tolerate drying, heat and UV far better than vegetative cells, which means the product survives storage, transport and a day in the sun on the back of a truck — the reason many liquid and non-spore inoculant products disappoint in the field.

Microbial Humic Granular Fertilizer suits bio-organic programmes, root-zone inoculation, and growers trying to reduce reliance on chemical phosphate.

Key Benefits

Two inputs, one application

Humic acid and live Bacillus in a single 2–4 mm granule. One pass across the field instead of two, one product to purchase and store, and no compatibility question between separate applications.

Spore-forming Bacilli that actually survive

Both strains form spores, which tolerate drying, temperature and UV. Non-spore-forming inoculants frequently die between the factory and the root zone — this is the most common reason a bio-product ‘does nothing’.

Humic acid protects the inoculant

The leonardite matrix is a carbon source and a physical refuge. Bacteria introduced into soil with a carrier establish more reliably than bacteria introduced alone.

Guaranteed count on the COA

≥0.5 × 10⁸ CFU/g for each strain, tested per batch and stated on the certificate — not a generic ‘contains beneficial bacteria’ claim.

Phosphate solubilisation

Bacillus megaterium is a well-documented phosphate solubiliser, releasing phosphorus locked up in the soil. Useful where total P is adequate but availability is not.

40% humic acid and 60% organic matter

The carrier is not an inert filler — it carries 40% minimum humic acid and 60% minimum organic matter, so the base does real soil work of its own.

Technical Specification

Parameter Specification Test standard
Humic acid (dry basis) 40.0% min GB/T 11957-2001
Organic matter (dry basis) 60.0% min NY 525-2012
Bacillus subtilis ≥ 0.5 × 10⁸ CFU/g GB 20287-2006
Bacillus megaterium ≥ 0.5 × 10⁸ CFU/g GB 20287-2006
Moisture 25.0% max GB/T 11957-2001
pH (1:100) 5.0 – 7.0 GB/T 33804-2017
Grain size 2 – 4 mm Sieve method
Appearance Black granule Visual
Product code JFHA-BHA-G

Specification values are guaranteed minimums on a dry basis, taken from the batch Certificate of Analysis and tested against the stated Chinese industry standards. Every shipment travels with its own COA stating the tested values.

Need the full Certificate of Analysis, MSDS, or TDS for your formulation or tender file?

Request COA / MSDS / TDS

Form & Solubility

Form: black 2–4 mm granules carrying a bacterial coating. Visually similar to our standard humic granule; the inoculant is applied as a coating after granulation.

Viability — handle accordingly: this is a live product. The Bacilli are spore-forming and robust, but they are still organisms. Do not store above 40 °C, do not leave in direct sun, and do not blend with high-salt fertiliser immediately before application. Those are the three things that reliably kill the count.

In water: the granule is insoluble. Do not attempt to dissolve it for fertigation — the carrier will settle and the product is not designed for that route.

Compatibility: generally compatible with organic and organic-mineral fertilizers and with most granular NPK at moderate inclusion. Avoid direct, prolonged contact with high-analysis soluble salts before application, and avoid tank-mixing with bactericides or copper-based products.

Honest note: this is a live biological product and it will not behave like a chemical input — results depend on storage, placement and soil conditions, and they are less predictable than a soluble nutrient. It performs best in the root zone of a growing crop, not broadcast onto bare ground and forgotten. If you need a guaranteed, immediate nutrient response, use a soluble fertiliser instead; use this to build soil biology over a season.

Which insoluble grade fits your process?

Grade Form Humic acid Organic matter Size Best for
Humic Acid Powder 80–100 mesh powder 40–70% 70–82% 80–100 mesh Granulation feed, soil conditioner base, blending
Humic Acid Crystal 2–4 mm crystal 60% min 2–4 / 1–6 mm Direct soil application, premium organic blends
Humic Acid Granule 2–4 mm round granule 40% min 60% min 2–4 mm Bulk blending, broadcasting, organic fertilizer
Humic Acid Prills 2–4 mm high-hardness 40% min 60% min 2–4 mm Urea/blending, mechanical spreading, export
Microbial Humic Granule (this product) 2–4 mm inoculated 40% min 60% min 2–4 mm Bio-organic fertilizer, root-zone inoculation

All five grades come from the same leonardite seam and carry the same heavy-metal declaration (Pb, As, Hg, Cd, Cr all below detection, GB 18877). They differ in particle form and where they fit in your process — not in origin.

Applications & Dosage

Applied to the root zone — the bacteria have to reach the soil to work:

Application How to use Rate
Bio-organic fertilizer base Use as the biological component in a bagged bio-organic fertilizer, or blend with composted manure and amino acid granules. 20–40% of formulation
Root-zone inoculation Band or side-dress at planting so the inoculant is placed where roots will reach it. 150–450 kg/ha
Vegetables and horticulture Apply at transplanting or as a side-dress. High-value crops give the quickest return on a biological input. 300–600 kg/ha
Orchard and vineyard Apply under the canopy in bands during the active root period. Established perennials respond well to season-long colonisation. 500 g – 2 kg per plant
Phosphate-limited ground Apply where total soil phosphorus is adequate but availability is poor — B. megaterium solubilises locked-up P. 300–600 kg/ha
Nursery and transplant Incorporate into the growing medium or apply at transplanting to establish colonisation early. 2–5 kg per m³

Packaging & Storage

Pack size Description
20 kg / 25 kg Woven PP bag with inner PE liner — standard export packing
50 kg Woven PP bag with inner liner — for high-volume programmes
1000–1100 kg Jumbo bag with discharge spout, 4 lifting loops
Custom Private-label printed bag, OEM specification, retail sizes on request

Storage: **This is a live product and storage affects the count.** Store in a cool, dry, ventilated place away from direct sunlight. Keep below 40 °C — a container left in the sun in a hot climate will seriously reduce viable counts.

Keep bags sealed until use and off bare concrete. Under cool, dry conditions the spore-forming Bacilli remain viable for 12 months or more, but the count declines with time and temperature, so we recommend using within one season of purchase for best results. Shelf life: 12 months in original, unopened packaging stored as above.

Custom packaging, private-label printing and OEM specifications are available on request. Packaging photos are available in the product gallery.

Successful Cases

Full case studies with crop data are published in our application sectors.

Frequently Asked Questions

How long do the bacteria stay viable?

Under cool, dry storage below 40 °C, the spore-forming Bacilli remain viable for 12 months or more, which is why we state a 12-month shelf life. The count does decline with time and temperature, so use within one season for best results. Heat is the main enemy — a container left in direct sun in a hot climate will do more damage in a week than a year of correct storage.

Can I blend this with chemical fertilizer?

Generally yes at moderate inclusion with granular NPK — this is a common practice. Avoid direct, prolonged contact with high-analysis soluble salts, particularly potassium chloride, before application, as osmotic stress will reduce the count. Blend close to the time of application rather than storing the mixture for months. If in doubt, send us your formulation and we will advise.

Can I mix it with fungicides or bactericides?

No. Bactericides and copper-based fungicides will kill the inoculant, and many systemic fungicides will suppress it. If a treatment is necessary, separate the applications in time rather than combining them. This applies to seed treatments too — treated seed will carry a bactericidal coating.

What is the difference between the two Bacillus strains?

Bacillus subtilis is primarily a root coloniser and a producer of growth-promoting metabolites; it competes against soil-borne pathogens around the root. Bacillus megaterium is best known as a phosphate solubiliser, releasing phosphorus that is locked in the soil. They do different jobs, which is why both are included rather than a single strain at double the rate.

Why use a humic carrier instead of peat or inert material?

The leonardite granule is not inert. It feeds the bacteria, buffers them against pH and moisture shock, and does soil work in its own right at 40% humic acid and 60% organic matter. An inert carrier delivers the organism and nothing else; this delivers the organism plus a genuine soil amendment.

Is this registered for organic use?

The humic carrier is unprocessed leonardite and both Bacillus strains are commonly permitted inputs, but certification is granted to your finished product by your own certifier, not to our raw material. Submit our TDS, MSDS and COA to them for review. We supply these with every enquiry.

Need a quotation or a sample?

Tell us your application, target market and packaging — we will come back with specification, price and lead time.

Request a Quote


FAQ

Frequently Asked Questions

Quick answers on samples, minimum order quantity, specifications, documents and shipping. For anything else, send us a message and we reply within one working day.

We provide free samples for most products. Tell us the product, form (powder, granule, flake or liquid) and target specification, and we will arrange express shipment. Sample lead time is usually 3-5 working days.

MOQ depends on the product and form. Standard powders usually start from 1 ton, while small packs and liquid concentrates can be lower. Tell us your target product and we will quote the exact MOQ.

Yes. Every batch ships with a Certificate of Analysis (COA) and a Material Safety Data Sheet (MSDS). Heavy-metal and key-parameter results are tested in our analytical lab, and we can also supply the documents your registration or customs clearance requires.

We supply humic and fulvic acid, amino acid, and seaweed extract products, covering agriculture, animal nutrition, environmental remediation, water treatment, and human-health applications.

Most products are available as powder, granule, flake or liquid. Standard packing is 25 kg PP/PE bags, jumbo bags, fibre drums or IBC tanks, and we can also pack 1 kg, 5 kg or 20 kg retail sizes for distributors.

Yes. We can adjust the specification (content, pH, solubility, particle size, moisture) and pack under your own brand and artwork. Send us your target specification sheet and we will confirm feasibility, MOQ and lead time.

Standard items ship in 7-15 working days after confirmation. Custom specifications and large volumes may take longer; we will give a firm date together with the quotation.

Our standard terms are 30% T/T deposit with the balance against the copy of the Bill of Lading. Irrevocable L/C at sight and other terms can be discussed for repeat or long-term orders.

We ship from Tianjin, Qingdao and Shanghai by sea, and by air or express for samples and small orders. We normally quote FOB, CIF and CFR, and can also work EXW or DDP on request.

Use the contact form on this page or email us with the product, quantity, target specification and destination port. We reply with a quote and lead time, usually within one working day.

Get In Touch

Send Us A Message

Fill out the form below and we will get back to you as soon as possible.

Related Products

Inquiry

No products available for inquiry at present.

Fill in your information