Welcome to JINGFENG GROUP

JINGFENG GROUP

Welcome to JINGFENG GROUP

  • A1-1001, Taida Xintiandi, Nanhai Road, Binhai New Area, Tianjin, 300457, China

  • +8618920222224

  • Mail Support: graeme@humate-cn.com

  • Mon – Sat: 8:00 am – 6:00 pm (GMT+8)

Insoluble Humic Acid

Insoluble Humic Acid Granule – 2–4 mm Disc-Granulated, 40% Humic Acid

Key Specifications

Humic acid (dry basis) : 40.0% min
Organic matter (dry basis) : 60.0% min
Water solubility : Nil (insoluble by design)
pH (1:100) : 5.0 – 7.0
CERES : Certified — NOP (US) & EU Organic (2018/848)
ISO 9001 : Certified quality management system

INSOLUBLE HUMIC ACID · DISC-GRANULATED

Insoluble Humic Acid Granule

Round, Uniform, Dust-Free Humic Granules for Bulk Blending and Broadcasting

Humic acid 40% min
Organic matter 60% min
Size 2–4 mm
Code JFHA-HA-G

2–4 mm round granule · 40% humic acid · 60% organic matter · pH 5.0–7.0 · dust-free

Product Overview

Insoluble Humic Acid Granule is leonardite powder formed into uniform 2–4 mm round granules on a disc granulator. It is the grade to choose when the material has to be spread by machine or blended with granular fertiliser, and when a fine powder would cause dust, segregation or handling problems.

Two practical problems drive customers to this grade. The first is segregation — a fine humic powder blended into granular NPK separates out during transport and sits in the bottom of the bag, so the farmer applies an uneven product. A granule matched to the 2–4 mm band stays where it was blended. The second is dust — powder generates a visible cloud at the spreader and losses to wind, neither of which a granule does.

The trade-off is straightforward: granulation adds a process step and the binder adds a little inert material, so humic acid sits at 40% minimum rather than the 60% of our raw crystal. You are buying handling behaviour, not peak analysis.

Insoluble Humic Acid Granule is the workhorse of the insoluble range — the grade most often ordered in full containers for bulk blending and direct broadcasting.

Key Benefits

Size-matched to granular NPK — no segregation

At 2–4 mm the granule sits in the same size band as standard MAP, DAP and urea prills. It stays distributed through blending, transport and spreading, so the analysis the farmer sees on the bag is the analysis that reaches the field.

Genuinely dust-free

Round granules produce no dust cloud at the spreader. That means no product lost to wind, no operator exposure complaint, and no dark film over everything in the shed.

Spreads accurately with standard equipment

The uniform round shape flows consistently through a spinner or pneumatic spreader, giving an even spread pattern. A powder of the same analysis would not deliver the same distribution.

Handles the whole logistics chain

Granules survive drum blending, conveyor transfer, bagging and palletising without breaking down into fines, so what leaves the factory is what arrives.

60% organic matter alongside the humic fraction

Beyond the 40% humic acid, the material carries 60% minimum organic matter — a real contribution to soil organic carbon, not a trace addition.

Neutral pH suits most soils

At pH 5.0–7.0 this grade is safe across the majority of agricultural ground, unlike our acidic crystal grade which is a specialist choice for alkaline conditions.

Technical Specification

Parameter Specification Test standard
Humic acid (dry basis) 40.0% min GB/T 11957-2001
Organic matter (dry basis) 60.0% min NY 525-2012
Moisture 30.0% max GB/T 11957-2001
pH (1:100) 5.0 – 7.0 GB/T 33804-2017
Grain size 2 – 4 mm Sieve method
Granule shape Round / spherical Visual
Water solubility Nil (insoluble by design)
Appearance Black round granule Visual
Product code JFHA-HA-G

Specification values are guaranteed minimums on a dry basis, taken from the batch Certificate of Analysis and tested against the stated Chinese industry standards. Every shipment travels with its own COA stating the tested values.

Need the full Certificate of Analysis, MSDS, or TDS for your formulation or tender file?

Request COA / MSDS / TDS

Form & Solubility

Form: uniform black round granules, 2–4 mm, produced on a disc granulator with a small amount of binder. Round, dense, matte surface, essentially dust-free.

In water: insoluble. The granule takes up moisture and slowly slakes but does not dissolve. Not for fertigation, drip lines or liquid fertiliser tanks — it will block filters and emitters.

Crush strength: adequate for normal handling — blending, conveying, bagging, spreading. It is not a high-hardness prill; if the material has to survive aggressive mechanical handling or be blended with urea in a rough drum, look at our Prills grade instead, which is built for exactly that.

In the blender: where this grade belongs. It matches granular NPK in size and density closely enough that segregation is not a practical problem on a standard blend line.

Honest note: this is a standard-hardness granule. It handles normally — blending, bagging, spreading — but it is not built for aggressive mechanical abuse. If your line is rough, or the blend has to sit in a warehouse through a humid season, the Prills grade is the safer buy and we will recommend it even though it costs more.

Which insoluble grade fits your process?

Grade Form Humic acid Organic matter Size Best for
Humic Acid Powder 80–100 mesh powder 40–70% 70–82% 80–100 mesh Granulation feed, soil conditioner base, blending
Humic Acid Crystal 2–4 mm crystal 60% min 2–4 / 1–6 mm Direct soil application, premium organic blends
Humic Acid Granule (this product) 2–4 mm round granule 40% min 60% min 2–4 mm Bulk blending, broadcasting, organic fertilizer
Humic Acid Prills 2–4 mm high-hardness 40% min 60% min 2–4 mm Urea/blending, mechanical spreading, export
Microbial Humic Granule 2–4 mm inoculated 40% min 60% min 2–4 mm Bio-organic fertilizer, root-zone inoculation

All five grades come from the same leonardite seam and carry the same heavy-metal declaration (Pb, As, Hg, Cd, Cr all below detection, GB 18877). They differ in particle form and where they fit in your process — not in origin.

Applications & Dosage

Built for mechanical handling and dry blending. Not for liquid application:

Application How to use Rate
Bulk blend (BB) with NPK Blend with granular urea, MAP, DAP or MOP. Matched particle size means the humic stays distributed through the blend. 5–15% of blend
Organic fertilizer base Use as the humic-bearing granular component in a bagged organic or organic-mineral fertilizer. 20–40% of formulation
Direct broadcasting Spread before planting and incorporate. Uniform granules give an even pattern from a standard spinner spreader. 300–750 kg/ha
Orchard and plantation Band or broadcast under the canopy. Larger, heavier particles are easier to place accurately than powder. 500 g – 2 kg per plant
Pasture and rangeland Broadcast for soil improvement. Granular form suits aerial or mechanical application where powder would drift badly. 300–600 kg/ha
Turf, golf and landscaping Apply before turf establishment or as a renovation treatment. Dust-free and easy to spread by hand. 300–500 kg/ha

Packaging & Storage

Pack size Description
20 kg / 25 kg Woven PP bag with inner PE liner — standard export packing
50 kg Woven PP bag with inner liner — for high-volume programmes
1000–1100 kg Jumbo bag with discharge spout, 4 lifting loops
Custom Private-label printed bag, OEM specification, retail sizes on request

Storage: Store under cover, on pallets, in a dry ventilated place. The granular form is stable and does not cake under normal warehouse conditions.

The risk with any granule is moisture: sustained wetting will soften and consolidate them into a mass. That does not destroy the humic acid but it makes the material impossible to spread. Keep it dry and it handles for years. Shelf life: 24 months in original, unopened packaging.

Custom packaging, private-label printing and OEM specifications are available on request. Packaging photos are available in the product gallery.

Successful Cases

Full case studies with crop data are published in our application sectors.

Frequently Asked Questions

Why is the humic acid only 40% when the powder is 60%?

Granulation requires a binder and the process adds a small amount of inert material, so the percentage comes down from the raw 60%. You are not losing humic substance per tonne of applied product in a way that matters for a soil programme — you are trading a few percentage points of analysis for handling behaviour that often matters more. If peak analysis is your buying criterion and you do not need granules, buy the powder or the crystal.

Will it break down into powder in the bag?

Not under normal handling. The disc granulation process produces a granule with adequate crush strength for blending, bagging, palletising and spreading. Excessive fines usually point to overly aggressive handling rather than a weak granule — if you are running a particularly rough line, tell us and we will supply the higher-hardness Prills grade instead.

Can I blend it with urea?

Yes, and it is a common combination. Urea is hygroscopic and will draw moisture, so blend close to the time of application rather than storing a urea-humic blend for months. Where the blend has to be stored or handled roughly, the Prills grade holds up better.

Is this product water soluble?

No. Like all grades in the insoluble range, it is milled and granulated leonardite with no chemical solubilisation. It releases into the soil over time rather than dissolving on contact. For a soluble product, see our potassium humate or potassium fulvate ranges.

What is the difference between this and the Prills grade?

Both are 2–4 mm round granules at 40% humic acid. Prills are produced by spray granulation, which gives a far harder, denser, lower-moisture particle (5% maximum moisture against 30%) and dramatically better crush strength. If the material has to survive aggressive mechanical handling or long storage, Prills are worth the premium. For standard blending and spreading, this granule is the more economical choice.

Need a quotation or a sample?

Tell us your application, target market and packaging — we will come back with specification, price and lead time.

Request a Quote


FAQ

Frequently Asked Questions

Quick answers on samples, minimum order quantity, specifications, documents and shipping. For anything else, send us a message and we reply within one working day.

We provide free samples for most products. Tell us the product, form (powder, granule, flake or liquid) and target specification, and we will arrange express shipment. Sample lead time is usually 3-5 working days.

MOQ depends on the product and form. Standard powders usually start from 1 ton, while small packs and liquid concentrates can be lower. Tell us your target product and we will quote the exact MOQ.

Yes. Every batch ships with a Certificate of Analysis (COA) and a Material Safety Data Sheet (MSDS). Heavy-metal and key-parameter results are tested in our analytical lab, and we can also supply the documents your registration or customs clearance requires.

We supply humic and fulvic acid, amino acid, and seaweed extract products, covering agriculture, animal nutrition, environmental remediation, water treatment, and human-health applications.

Most products are available as powder, granule, flake or liquid. Standard packing is 25 kg PP/PE bags, jumbo bags, fibre drums or IBC tanks, and we can also pack 1 kg, 5 kg or 20 kg retail sizes for distributors.

Yes. We can adjust the specification (content, pH, solubility, particle size, moisture) and pack under your own brand and artwork. Send us your target specification sheet and we will confirm feasibility, MOQ and lead time.

Standard items ship in 7-15 working days after confirmation. Custom specifications and large volumes may take longer; we will give a firm date together with the quotation.

Our standard terms are 30% T/T deposit with the balance against the copy of the Bill of Lading. Irrevocable L/C at sight and other terms can be discussed for repeat or long-term orders.

We ship from Tianjin, Qingdao and Shanghai by sea, and by air or express for samples and small orders. We normally quote FOB, CIF and CFR, and can also work EXW or DDP on request.

Use the contact form on this page or email us with the product, quantity, target specification and destination port. We reply with a quote and lead time, usually within one working day.

Get In Touch

Send Us A Message

Fill out the form below and we will get back to you as soon as possible.

Related Products

Inquiry

No products available for inquiry at present.

Fill in your information