Bio Fulvic Acid Powder 90%
The Concentrated Grade — 90% Fulvic Acid, Minimum Make-Up
Every lot ships with a Certificate of Analysis stating actual tested values.
Product Overview
Bio Fulvic Acid is JINGFENG’s biotech-fermented fulvic acid — produced by microbial fermentation of plant-derived feedstock rather than mined from leonardite. It is a short-chain humic substance rich in fulvic acid, free amino acids, enzymes, sugars and trace nutrients. Fully water soluble and hormone-free, it is used worldwide as a fertilizer raw material and plant biostimulant — chelating nutrients, buffering soil pH, and improving nutrient uptake in foliar, fertigation and blending programmes.
Bio Fulvic Acid Powder 90% is the concentrated end of our fermented fulvate line, guaranteed 90% fulvic acid on a dry basis with 100% water solubility. It is built for concentrated formulations, soluble concentrates and high-value foliar programmes where you want maximum active carbon and minimum inert make-up per kilogram.
At 90% fulvic acid the powder is darker and a little more hydroscopic than the 50%/70% grades, and its pH sits in the 5–7 window rather than 4–6 — both are normal consequences of the higher active load. Fermentation-derived amino acids, enzymes and sugars are still present, so the biostimulant effect is broader than a plain salt.
Use it when your formula is tight on space or you are selling a high-fulvic concentrate. For general blending the 50%/70% grades are the more economical choice; the 90% grade is where the label says ‘90% fulvic acid’.
Key Benefits
90% fulvic acid
The most concentrated grade in the family — minimum inert, maximum active carbon per kilogram.
Fermented, not mined
Carries free amino acids, enzymes and sugars; hormone-free green bio-input.
100% soluble
Dissolves with no residue; suitable for concentrated soluble liquids and foliar concentrates.
Chelates and buffers
Complexes metal ions, frees fixed phosphorus, buffers soil pH toward 5.5–7.0.
Hard-water stable
Anti-flocculation limit 32 meq/g; soluble across pH 1–14 and in saturated brine.
COA on every batch
Tested fulvic acid, pH and moisture against HG/T and NY/T methods, stated on the COA.
Technical Specification
| Parameter | Specification | Test standard |
|---|---|---|
| Appearance | Brown powder | Visual inspection |
| Fulvic acid (dry basis) | ≥ 90.0% | HG/T 5334-2018 |
| Water solubility | 100% | NY/T 1978 |
| pH (1:100) | 5.0 – 7.0 | HG/T 3278 |
| Moisture | ≤ 5.0% | GB/T 8576 |
Specification values are guaranteed minimums on a dry basis, taken from the batch Certificate of Analysis and tested against the stated Chinese industry standards. Every shipment travels with its own COA stating the tested values.
Need the full Certificate of Analysis, MSDS, or TDS for your formulation or tender file?
Request COA / MSDS / TDSForm & Solubility
Form: free-flowing dark brown powder. The highest active load in the family, so a little more hygroscopic than the 50%/70% grades — keep bags sealed.
In water: dissolves completely under light agitation with no residue, ideal for concentrated soluble stocks. Add onto moving water to avoid a surface crust.
Dust: standard PPE at the weighing station recommended, as with any fine powder.
Which powder? 90% for concentrated/high-fulvic labels; 50%/70% for cost-sensitive blending.
How Bio Fulvic Acid grades compare
| Grade | Form | Fulvic acid | Key element | K₂O | Best for |
|---|---|---|---|---|---|
| Bio Fulvic Acid Powder 50% | Powder | ≥ 50% | — | ≥ 12% | Standard blending & foliar base |
| Bio Fulvic Acid Powder 70% | Powder | ≥ 70% | — | ≥ 12% | Higher-active powder |
| Bio Fulvic Acid Powder 90% (this product) | Powder | ≥ 90% | — | — | Concentrated / high-fulvic label |
| Bio Fulvic Acid Chelate Calcium | Powder | ≥ 45% | Ca ≥ 8% | — | Correct Ca deficiency |
| Bio Fulvic Acid Chelate Iron | Powder | ≥ 15% | Fe ≥ 14% | — | Correct Fe chlorosis |
| Bio Fulvic Acid Chelate Zinc | Powder | ≥ 15% | Zn ≥ 10% | — | Correct Zn deficiency |
| Bio Fulvic Acid Chelate Manganese | Powder | ≥ 24.86% | Mn ≥ 13% | — | Correct Mn deficiency |
| Bio Fulvic Acid Chelate Magnesium | Powder | ≥ 21.54% | Mg ≥ 10% | ≥ 3.48% | Correct Mg deficiency |
| Bio Fulvic Acid Round Granule | Granule | ≥ 52.3% | — | ≥ 10.42% | Dust-free spread or dissolve |
All grades are fermented, 100% water soluble and stable in hard/saline water (anti-flocculation 32 meq/g).
Applications & Dosage
| Application | How to use | Rate |
|---|---|---|
| Concentrated soluble formula | Use as the fulvic base of a high-strength WS concentrate at 5–10% of total solids. | 5–10% of formula |
| High-value foliar concentrate | Dilute 1:1000–1:1500; spray every 7–15 days. | 0.2–0.5 kg/mu |
| Drip / fertigation | Pre-dissolve, filter, then meter into the line. | 0.5–1.0 kg/mu |
| Compound / bulk-blended NPK | Add 5–10 kg per tonne where a high fulvic guarantee is required. | 5–10 kg/t |
| Seed soaking / root dip | 1:500–1:800 solution, soak 6–12 h. | 1:500–1:800 |
Packaging & Storage
| Pack size | Description |
|---|---|
| 1 kg / 5 kg / 10 kg | Printed aluminium foil bag — retail and sample size |
| 20 kg / 25 kg | Woven or paper bag with inner PE liner |
| 1000–1100 kg | Jumbo bag with discharge spout |
Storage: Store sealed in a cool, dry, well-ventilated place. Most hygroscopic of the three powders because of the high active load; use opened bags promptly. Stable 2 years unopened.
Custom packaging, private-label printing and OEM specifications are available on request. Packaging photos are available in the product gallery.
Successful Cases
Soluble concentrate maker, Spain
Used the 90% grade as the fulvic base of a concentrated soluble; ‘90% fulvic acid’ became the pack claim.
Explore applications → Field referenceFoliar specialist, Egypt
1:1200 foliar on tomato and pepper; stronger root mass at transplant and improved fruit set reported.
Explore applications → Field referenceCompound blender, Brazil
8 kg/t into a granular NPK for a high-fulvic retail claim; no segregation through transport.
Explore applications →Full case studies with crop data are published in our application sectors.
Frequently Asked Questions
Why 90% instead of 50% or 70%?
You get the highest fulvic guarantee per kilogram with the least inert make-up — the grade for concentrated formulas and high-fulvic labels. It costs more per tonne, so for general blending the 50%/70% grades are better value.
Is it still fully soluble?
Yes, 100% water soluble with light agitation and no residue.
Does the pH 5–7 window matter?
It is slightly higher than the 50%/70% grades because of the higher active load — normal for this grade. Account for it if your formula has a tight pH window.
Is it stable in hard water?
Yes — anti-flocculation limit 32 meq/g; soluble across pH 1–14 and in saturated brine.
What is the minimum order and lead time?
Made to order on a fermentation campaign. MOQ higher than the stocked 50%/70% grades; tell us your volume for a firm quote, typically 15–25 days.
Do you supply a COA per batch?
Yes — fulvic acid, pH and moisture tested to HG/T and NY/T methods.
Need a quotation or a sample?
Tell us your application, target market and packaging — we will come back with specification, price and lead time.
Request a Quote
8618920222224