Bio Fulvic Acid Chelate Magnesium
Builds Chlorophyll — The Fulvic-Chelated Magnesium Grade
Every lot ships with a Certificate of Analysis stating actual tested values.
Product Overview
Bio Fulvic Acid is JINGFENG’s biotech-fermented fulvic acid — produced by microbial fermentation of plant-derived feedstock rather than mined from leonardite. It is a short-chain humic substance rich in fulvic acid, free amino acids, enzymes, sugars and trace nutrients. Fully water soluble and hormone-free, it is used worldwide as a fertilizer raw material and plant biostimulant — chelating nutrients, buffering soil pH, and improving nutrient uptake in foliar, fertigation and blending programmes.
Bio Fulvic Acid Chelate Magnesium supplies 10% magnesium (Mg, as part of 10%+ Ca+Mg) carried by 21.54% fulvic acid, with 3.48% K₂O and 13.95% sulfur for a broad secondary-nutrient package. Water-insoluble matter is just 0.18% — no blockage in any system.
Magnesium is the central atom of chlorophyll; deficiency shows as interveinal yellowing of older leaves, leaf curling and low photosynthesis. Fulvic acid chelates the Mg and carries it into the plant, correcting the disorder that ordinary magnesium sulphate fixes slowly. Heavy-metal indicators are far below standard (Pb, Hg, Cr not detected), so it is safe for crops, soil and environment.
Uniform powder, low moisture (2.59%), no caking. Use it in drip, foliar, seed treatment and soil application across fruit, vegetable, grain and cash crops.
Key Benefits
10% magnesium (as Ca+Mg ≥10%)
Mg is the core of chlorophyll; fulvic chelation carries it into the plant fast.
21.54% fulvic acid + K₂O 3.48% + S 13.95%
A broad secondary-nutrient package, not just Mg.
0.18% water-insoluble
No blockage; suitable for drip, sprinkler and foliar.
Corrects Mg deficiency
The grade for interveinal yellowing of older leaves, curling and low photosynthesis.
High safety
Heavy metals (Pb, Hg, Cr) not detected; safe for crops and soil.
COA on every batch
Tested Mg, fulvic acid, K₂O, S, moisture and pH against HG/T and NY/T methods.
Technical Specification
| Parameter | Specification | Test standard |
|---|---|---|
| Secondary elements (Ca+Mg) | ≥ 10.0% (Mg ≥ 10.0%) | NY/T 1117-2010 |
| Fulvic acid | ≥ 21.54% | HG/T 5334-2018 |
| Potassium oxide (K₂O) | ≥ 3.48% | NY/T 1977 |
| Sulfur (S) | ≥ 13.95% | NY/T 1117-2010 |
| Water-insoluble matter | ≤ 0.18% | NY/T 1973-2021 |
| Moisture | ≤ 3.0% | GB/T 20886.2-2021 |
| pH (1:100) | ≈ 5.8 | NY/T 1973-2021 |
Specification values are guaranteed minimums on a dry basis, taken from the batch Certificate of Analysis and tested against the stated Chinese industry standards. Every shipment travels with its own COA stating the tested values.
Need the full Certificate of Analysis, MSDS, or TDS for your formulation or tender file?
Request COA / MSDS / TDSForm & Solubility
Form: uniform brown powder, low moisture (2.59%), free-flowing, no caking.
In water: dissolves completely with no residue; suitable for drip, sprinkler and foliar.
Best practice: foliar at 1000–1500× in morning/evening; drip at 800–1200×. Do not mix with strong acid/alkali; jar-test before blending. If rain within 4 h, rinse and re-spray.
Storage: cool, dry, ventilated; seal tightly. Shelf life 24 months.
How Bio Fulvic Acid grades compare
| Grade | Form | Fulvic acid | Key element | K₂O | Best for |
|---|---|---|---|---|---|
| Bio Fulvic Acid Powder 50% | Powder | ≥ 50% | — | ≥ 12% | Standard blending & foliar base |
| Bio Fulvic Acid Powder 70% | Powder | ≥ 70% | — | ≥ 12% | Higher-active powder |
| Bio Fulvic Acid Powder 90% | Powder | ≥ 90% | — | — | Concentrated / high-fulvic label |
| Bio Fulvic Acid Chelate Calcium | Powder | ≥ 45% | Ca ≥ 8% | — | Correct Ca deficiency |
| Bio Fulvic Acid Chelate Iron | Powder | ≥ 15% | Fe ≥ 14% | — | Correct Fe chlorosis |
| Bio Fulvic Acid Chelate Zinc | Powder | ≥ 15% | Zn ≥ 10% | — | Correct Zn deficiency |
| Bio Fulvic Acid Chelate Manganese | Powder | ≥ 24.86% | Mn ≥ 13% | — | Correct Mn deficiency |
| Bio Fulvic Acid Chelate Magnesium (this product) | Powder | ≥ 21.54% | Mg ≥ 10% | ≥ 3.48% | Correct Mg deficiency |
| Bio Fulvic Acid Round Granule | Granule | ≥ 52.3% | — | ≥ 10.42% | Dust-free spread or dissolve |
All grades are fermented, 100% water soluble and stable in hard/saline water (anti-flocculation 32 meq/g).
Applications & Dosage
| Application | How to use | Rate |
|---|---|---|
| Drip / fertigation | 800–1200× dilution, once every 7–10 days at seedling/flowering/expansion. | 7.5–15 kg/ha |
| Foliar spray | 1000–1500× dilution, 2–3 times; focus on young fruit and expansion. | 3–5 kg/ha |
| Seed dressing / soaking | 1500–2000× dilution; soak 6–12 h or dress to wet seeds. | as per crop |
| Soil application | Before sowing/transplanting, with organic fertiliser. | 15–22.5 kg/ha |
Packaging & Storage
| Pack size | Description |
|---|---|
| 1 kg / 5 kg / 10 kg | Printed aluminium foil bag — retail and sample size |
| 20 kg / 25 kg | Woven or paper bag with inner PE liner |
| 1000–1100 kg | Jumbo bag with discharge spout |
Storage: Store in a cool, dry, well-ventilated warehouse away from direct sunlight, high temperature and humidity. Keep away from food and feed. Seal the package tightly after each use. Shelf life 24 months from production date.
Custom packaging, private-label printing and OEM specifications are available on request. Packaging photos are available in the product gallery.
Successful Cases
Strawberry greenhouse, Shandong
Drip 800× every 7 days ×3. Lateral roots +30%, blossom-end rot −90%, fruit set +15%, sugar +1.2°.
Explore applications → Field referenceCitrus plantation, Guangxi
Drip 1000× + foliar 1200× at expansion. Fruit weight +12%, colour uniformity 95%, soluble solids +1.5°.
Explore applications → Field referenceWheat grower, Henan
Seed soak 1800× + foliar 1500× at jointing/filling. Germination +13%, lodging −85%, yield +18%.
Explore applications →Full case studies with crop data are published in our application sectors.
Frequently Asked Questions
Why fulvic-chelated magnesium?
Mg is the core of chlorophyll but is easily fixed in soil; fulvic acid chelates it and carries it into the plant, correcting interveinal yellowing faster than straight sulphate.
Can it be used during flowering?
Yes. At 1000–1500× foliar it does not affect pollination and strengthens flower organs, reducing flower/fruit drop.
Is it suitable for organic farming?
Made from quality raw materials, free of harmful chemicals and heavy metals (Pb, Hg, Cr not detected); meets relevant organic-input standards. Confirm your body at enquiry.
Is it compatible with other inputs?
Mixes with most neutral/acidic fertilizers and pesticides; not with strong acid/alkali. Jar-test first.
What is the shelf life?
24 months from production date under proper storage. Seal tightly after use.
Do you provide a COA per batch?
Yes — Mg, fulvic acid, K₂O, S, moisture and pH tested to HG/T and NY/T methods.
Need a quotation or a sample?
Tell us your application, target market and packaging — we will come back with specification, price and lead time.
Request a Quote
8618920222224