Amino Oligosaccharide Peptide Liquid
Peptides Plus Oligosaccharides — Nutrition and Plant Activation in One Pass
Every lot ships with a Certificate of Analysis stating tested total amino acids, free amino acids, total nitrogen and chloride.
Product Overview
Amino acids are the building blocks of proteins and, in free form, the most readily absorbed nitrogen source a plant or an animal can take up. JINGFENG’s amino acid range is produced from plant protein (soybean) or animal protein by acid or enzymatic hydrolysis, which breaks the protein chain down into free amino acids, short peptides and water-soluble nitrogen. The result is a 100% water-soluble input used as a foliar and fertigation biostimulant, a chelating agent for trace elements, and a feed-grade protein source.
Amino Oligosaccharide Peptide Liquid is the most active product in our amino acid range — a brown, viscous concentrate that combines nutrition with plant activation. One litre carries ≥ 500 g/L total amino acids, made up of ≥ 200 g/L free amino acids and ≥ 300 g/L of peptides and small peptides, plus ≥ 100 g/L oligosaccharides and 30% organic carbon.
The oligosaccharides are the difference. They are the signal molecules that a plant recognises during a pathogen attack, so applying them triggers the same defence response without the infection: enzyme activity rises, the plant’s own repair and anti-disease systems come up, and nutrient uptake becomes more efficient. That is why the product is described as a biological activator rather than a fertiliser.
The practical results are the ones growers chase — less flower and fruit drop, stronger roots and seedlings, better disease and stress tolerance, and higher quality at harvest. At pH 5 to 7 it is mild enough for crops, soil and beneficial microbes, and long-term use improves soil condition.
Key Benefits
≥ 500 g/L total amino acids
Half a kilogram of amino acids in every litre — ≥ 200 g/L free and ≥ 300 g/L as peptides — plus ≥ 100 g/L oligosaccharides and 30% organic carbon.
No dissolving step
Supplied ready to dilute, which saves a mixing stage in fertigation and spray programmes.
Metering accuracy
A uniform liquid is easy to dose precisely, batch after batch.
High load per litre
Concentrated grades carry a high amino acid load per litre, which keeps freight cost per unit of active down.
Mixes with most inputs
Compatible with common foliar fertilisers and, after a jar test, with many agrochemicals.
COA on every batch
Each lot ships with a Certificate of Analysis stating the tested total and free amino acids, peptide fraction, oligosaccharides and organic carbon against the stated Chinese industry standards.
Technical Specification
| Parameter | Specification | Test standard |
|---|---|---|
| Appearance | Brown viscous liquid | Visual inspection |
| Total amino acid | ≥ 500 g/L | NY/T 1975-2010 |
| Free amino acid | ≥ 200 g/L | NY/T 1975-2010 |
| Peptides + small peptides | ≥ 300 g/L | NY/T 1973-2021 |
| Oligosaccharides | ≥ 100 g/L | GB/T 35881-2018 |
| Organic carbon | 30% | NY/T 1976-2010 |
| pH | 5.0 – 7.0 | NY/T 1973-2021 |
Specification values are guaranteed minimums on a dry basis, taken from the batch Certificate of Analysis and tested against the stated Chinese industry standards. Every shipment travels with its own COA stating the tested values.
Need the full Certificate of Analysis, MSDS, or TDS for your formulation or tender file?
Request COA / MSDS / TDSForm & Solubility
Form: a concentrated liquid supplied in drums or IBCs, ready to dilute and meter without a dissolving step.
In water: miscible with water in any proportion, so it can be injected straight into a fertigation line or dosed into a spray tank.
Handling: store upright and frost-free. Rinse lines with clean water after use.
Why oligosaccharides matter. Oligosaccharides are short carbohydrate chains that plants read as a signal. They are released from cell walls during a fungal or bacterial attack, and the plant responds by switching on its defence chemistry. Applying them does the same thing without the disease: enzyme systems come up, metabolism runs faster, and the plant tolerates stress better. Combining them with peptides and free amino acids means the activation and the nutrition arrive together.
Handling. It is viscous, so shake vigorously before use to distribute the active fraction evenly. Avoid strongly acidic products below pH 4 and strongly alkaline ones above pH 10, do not spray above 30 °C, and reapply if rain falls within four hours.
How the amino acid grades compare
| Grade | Form | Total amino acid | Free amino acid | Total nitrogen | Best for |
|---|---|---|---|---|---|
| Amino Acid Chelated Trace Elements Liquid | Liquid | ≥ 200 g/L | — | ≥ 12.0% | Trace element correction plus nitrogen; no dissolving step |
| Amino Acid Chelated Trace Elements Powder 15% | Powder | ≥ 25.0% free | ≥ 25.0% | — | Six chelated trace elements on a free amino acid base |
| Salt-Free Amino Acid Liquid 30% | Liquid | ≥ 300 g/L | — | ≥ 7.0% | Chloride-sensitive crops; foliar and drip |
| Concentrated Amino Acid Liquid 30% | Liquid | ≥ 300 g/L | — | ≥ 7.0% | Field crops and cotton; lowest volume per hectare |
| 30% Hydrolyzed Amino Acid Powder | Powder | ≥ 30.0% | — | ≥ 7.0% | Field-scale foliar, fertigation and liquid fertiliser base |
| Transparent Amino Acid Liquid 30% | Liquid | ≥ 300 g/L | — | ≥ 7.0% | Low-chloride liquid for strawberry, tobacco and grape |
| 30% Amino Acid Round Granule | Granule | ≥ 30.0% | — | ≥ 7.0% | Machine spreading, NPK blending and seedling substrate |
| 40% Chlorine-Free Amino Acid Powder | Powder | ≥ 40.0% | ≥ 38.0% | — | Strawberry, tobacco and grape; chloride capped at 1% |
| Amino Acid Chelated Calcium and Magnesium Liquid | Liquid | ≥ 400 g/L | ≥ 200 g/L | — | Blossom-end rot, fruit cracking and magnesium chlorosis |
| 45% Hydrolyzed Amino Acid Powder | Powder | ≥ 45.0% | ≥ 40.0% | ≥ 17.0% | High-nitrogen grade; liquid formulations and hydroponics |
| 50% Hydrolyzed Amino Acid Powder | Powder | ≥ 45.0% | ≥ 40.0% | ≥ 15.0% | Cost-efficient foliar and fertigation over large areas |
| Amino Oligosaccharide Peptide Liquid (this product) | Liquid | ≥ 500 g/L | ≥ 200 g/L | — | Plant activation; flower and fruit drop and disease pressure |
| 50% Enzymatic Amino Acid Liquid | Liquid | ≥ 500 g/L | 20 – 30 g/L | — | Fertigation and foliar programmes, no dissolving step |
| 60% Hydrolyzed Amino Acid Powder | Powder | ≥ 60.0% | ≥ 55.0% | ≥ 12.0% | General-purpose foliar, drip and flushing |
| 70% Hydrolyzed Amino Acid Powder | Powder | ≥ 70.0% | ≥ 65.0% | ≥ 15.0% amino N | Fast free-amino response at flowering, fruit set and stress recovery |
| 80% Hydrolyzed Amino Acid Powder — Tank-Mix | Powder | ≥ 80.0% | ≥ 75.0% | ≥ 12.5% | Liquid NPK and trace-element compounding |
| 80% Amino Acid Powder — Standard | Powder | ≥ 80.0% | ≥ 75.0% | ≥ 12.5% | Feed premixes, dry blends, straight foliar and soil |
| 80% Enzymatic Amino Acid Powder | Powder | ≥ 80.0% | 3.0 – 5.0% | ≥ 15.0% | Peptide-driven programmes; seed treatment and high-value crops |
| 90% Hydrolyzed Amino Acid Powder | Powder | ≥ 90.0% | ≥ 85.0% | ≥ 15.0% organic N | Premium agriculture, feed and cosmetics |
| 90% Enzymatic Amino Acid Powder | Powder | ≥ 90.0% | ≥ 65.0% | ≥ 16.0% | Peptide-rich; organic and cosmetic specifications |
All grades are 100% water soluble and are hydrolysed from plant- or animal-source protein. Higher grades carry a larger free amino acid share, so less product is needed per hectare for the same response.
Applications & Dosage
For fruit, vegetable, grain, cash and oil crops, and especially where flower and fruit drop, weak seedlings or recurring disease pressure are the limiting factors. Typical rates are 15 to 22.5 L per hectare through drip, 7.5 to 10 L per hectare as a foliar spray and 22.5 to 30 L per hectare in a flushing application.
| Application | How to use | Rate |
|---|---|---|
| Drip irrigation / fertigation | Apply at seedling, flowering and fruit expansion, two to three times per cycle. | 1:800 – 1:1200 |
| Foliar spray | Spray at bud, full flowering and young fruit to hold flower and fruit; avoid midday heat. | 1:1000 – 1:1500 |
| Seed soaking and root irrigation | Soak seed before sowing, or irrigate the root zone at transplanting. | 1:1500 – 1:2000 |
| Flushing application | Apply with irrigation water through rapid growth and after stress events. | 1:500 – 1:800 |
Packaging & Storage
| Pack size | Description |
|---|---|
| 1 kg / 5 kg / 10 kg | Printed aluminium foil bag |
| 10 kg / 20 kg | Printed carton box |
| 20 / 25 kg | Woven or paper bag with inner liner; colour-printed PP/PE bag with inner liner |
| 200 L drum / 1000 L IBC | For liquid grades; food-grade HDPE drum with tamper-evident closure |
| 1000 / 1100 kg | Jumbo bag with discharge spout |
Storage: Store in a cool, dry, well-ventilated place, away from direct sunlight and moisture. Stable for 24 months in the sealed original packaging; reseal opened bags. Liquid grades: store upright and frost-free.
Custom packaging, private-label printing and OEM specifications are available on request. Packaging photos are available in the product gallery.
Successful Cases
Tomato greenhouse, Hebei (2 ha)
30% flower and fruit drop with recurring blight and spindly seedlings. Drip at 1:1000 at seedling plus foliar at 1:1200 at early flowering and young fruit: drop down to 4.5%, blight down 70%, seedling survival up 20% with denser roots, and yield up 28% to 90 tons per hectare with shelf life extended by 15 days.
Explore applications → Field referenceTable grape orchard, Shandong (5 ha)
Fruit set only 65%, 15% cracking and sugar stuck at 14–15 Brix, with recurring downy mildew. Foliar at 1:1100 at bud break and full bloom plus drip at 1:900 during berry swelling: fruit set up to 95%, cracking down to 3%, sugar up to 17–18 Brix and fungicide use down 40%.
Explore applications → Field referenceApple orchard, Shaanxi (8 ha)
Years of chemical fertiliser had left weak roots, only 40% fruitful buds and small misshapen fruit. Drip at 1:1000 at dormancy break and fruit expansion plus foliar at 1:1300 at flowering: root biomass up 35%, fruitful buds up to 65%, apples 15% larger with 22% more red colour and storage rot down 50%.
Explore applications → Field referenceRice field, Jiangsu (10 ha)
Germination at 82%, slow tillering, drought stress and frequent rice blast. Seed soaking at 1:1800 plus flushing at 1:700 at seedling and tillering: germination up to 95%, tillers per plant up 23%, rice blast down 60% and yield up 18% to 8.5 tons per hectare.
Explore applications →Full case studies with crop data are published in our application sectors.
Frequently Asked Questions
How is this different from a normal amino acid fertiliser?
A normal amino acid fertiliser supplies nutrition. This one supplies nutrition and activation: the oligosaccharides are signal molecules that switch on the plant’s own defence and enzyme systems, the peptides carry their own physiological activity, and the organic carbon feeds the soil biology. Instead of only feeding the plant, it makes the plant work better.
When should I apply it to stop flower drop?
The windows are bud formation, early flowering and petal fall. One foliar application at each stage at 1:1000 to 1:1200, seven to ten days apart, is the schedule most of our growers use; many report flower drop cut by half or better.
Can I use it during full bloom without harming bees?
Yes. It is mild and non-toxic to pollinators when used as directed. Spray early in the morning before bees are active or late in the evening, and stay inside the 1:1000 to 1:1500 foliar range.
Any compatibility issues when tank-mixing?
It works with most neutral and weakly acidic fertilisers and pesticides. Strong acids below pH 4 and strong alkalis above pH 10 break down the peptides and oligosaccharides — the quick test is to mix 100 mL of each and use it only if nothing precipitates or discolours in 30 minutes.
What if the liquid thickens in the drum?
That is normal for a viscous concentrate. Shake vigorously before use; thickening does not reduce the nutrient content or the effect.
How long does it keep and how should it be stored?
24 months from production, kept at 5 to 35 °C in a cool, dark, ventilated place away from direct sun. Do not stack containers upside down and seal the cap tightly after each use.
Do you offer samples, and what is the minimum order?
A free 1 L sample is available with a small-plot trial guide — you cover the express cost, and it ships within two working days. Bulk MOQ is 500 L, with 5 to 10% volume discounts above 5000 L.
Can the formula be adjusted for my market?
Yes — full OEM and ODM service. The amino acid, peptide and oligosaccharide levels can be tuned to your crops and disease pressure, and packaging from 1 L to 200 L can carry your own brand and label.
Need a quotation or a sample?
Tell us your application, target market and packaging — we will come back with specification, price and lead time.
Request a Quote
8618920222224