Welcome to JINGFENG GROUP

JINGFENG GROUP

Welcome to JINGFENG GROUP

  • A1-1001, Taida Xintiandi, Nanhai Road, Binhai New Area, Tianjin, 300457, China

  • +8618920222224

  • Mail Support: graeme@humate-cn.com

  • Mon – Sat: 8:00 am – 6:00 pm (GMT+8)

Amino Acid

50% Hydrolyzed Amino Acid Powder

Key Specifications

Total amino acid : ≥ 45.0%
Free amino acid : ≥ 40.0%
Total nitrogen : ≥ 15.0%
Water solubility : 100%
pH : 4.0 – 6.0
ISO 9001 : Certified quality management system
Heavy metals : Within NY/T 1978-2022 limits (batch COA)

Amino Acid

50% Hydrolyzed Amino Acid Powder

The Cost-Effective All-Rounder — Plant-Source Amino Acids Over Large Areas

Total amino acid ≥ 45.0%
Free amino acid ≥ 40.0%
Total nitrogen ≥ 15.0%
Water solubility 100%

Every lot ships with a Certificate of Analysis stating tested total amino acids, free amino acids, total nitrogen and chloride.

Product Overview

Amino acids are the building blocks of proteins and, in free form, the most readily absorbed nitrogen source a plant or an animal can take up. JINGFENG’s amino acid range is produced from plant protein (soybean) or animal protein by acid or enzymatic hydrolysis, which breaks the protein chain down into free amino acids, short peptides and water-soluble nitrogen. The result is a 100% water-soluble input used as a foliar and fertigation biostimulant, a chelating agent for trace elements, and a feed-grade protein source.

50% Hydrolyzed Amino Acid Powder is the volume grade of our plant-source amino acid range — the one to quote when the amino acid load has to go on every pass over a large area rather than only at key growth stages. The grade name refers to the typical analysis; the guaranteed floor on the specification is ≥ 45% total amino acids with ≥ 40% in the free form and ≥ 15% total nitrogen, and the powder is 100% water soluble.

It is hydrolysed from plant protein, which is what makes it the grade to offer when the buyer needs a non-animal origin: organic programmes, vegan-friendly supply chains, and markets with sourcing restrictions on animal-derived inputs.

Because the concentration is lower than our 60% to 90% grades, the rate per hectare is higher — but so is the cost efficiency per hectare on field crops, vegetables and orchard blocks where the response is wanted over the whole season.

Key Benefits

≥ 45% total amino acids

A guaranteed floor of ≥ 45.0% total with ≥ 40.0% in the free form — the plant-source grade that covers the largest area per unit of cost.

Dissolves completely

100% water soluble with no residue, so it can go straight into the spray tank or through a drip line.

High free amino acid share

A large part of the load is in the free form, which plants and animals absorb without further breakdown.

Low chloride option

Low-chloride grades avoid salt burn on chloride-sensitive crops and keep the salt load down in feed rations.

Blend-friendly

A free-flowing powder that disperses evenly into NPK, organic fertilizer and feed premixes, even at low inclusion rates.

COA on every batch

Each lot ships with a Certificate of Analysis stating the tested total amino acids, free amino acids, total nitrogen, chloride and heavy metals against the stated Chinese industry standards.

Technical Specification

Parameter Specification Test standard
Appearance Yellow powder Visual inspection
Total amino acid ≥ 45.0% NY/T 1975-2010
Free amino acid ≥ 40.0% NY/T 1975-2010
Total nitrogen ≥ 15.0% NY/T 1977-2010
Water solubility 100% NY/T 1973-2021
pH 4.0 – 6.0 NY/T 1973-2021
Lead (Pb) ≤ 50 ppm NY/T 1978-2022
Cadmium (Cd) ≤ 10 ppm NY/T 1978-2022
Mercury (Hg) ≤ 5 ppm NY/T 1978-2022
Arsenic (As) ≤ 10 ppm NY/T 1978-2022
Chromium (Cr) ≤ 50 ppm NY/T 1978-2022

Specification values are guaranteed minimums on a dry basis, taken from the batch Certificate of Analysis and tested against the stated Chinese industry standards. Every shipment travels with its own COA stating the tested values.

Need the full Certificate of Analysis, MSDS, or TDS for your formulation or tender file?

Request COA / MSDS / TDS

Form & Solubility

Form: fine, free-flowing powder with low dust, easy to weigh out by the bag and to blend into dry mixes.

In water: 100% water soluble. It wets out quickly and dissolves cleanly under light agitation, leaving no residue to block filters, spray nozzles or drip lines.

Handling: use standard dust protection when handling bulk. Reseal opened bags to keep moisture out.

In water: 100% water soluble. It wets out quickly under light agitation and leaves no residue to block filters, nozzles or drippers — which is also why it is the grade most customers use to make their own liquid amino acid fertiliser on site.

Hygroscopic: the powder draws moisture from the air. Reseal the bag straight after weighing out and keep it dry. If a bag has caked, crumble the cake back to powder — caking does not change the analysis or the absorption.

Mixing: compatible with most water-soluble NPK and with neutral to weakly acidic pesticides. Do not mix with strongly alkaline material above pH 8, and run a 100 mL jar test before the first full batch.

Amino acids from plant-source protein hydrolysis — a water-soluble nitrogen and free amino acid source for foliar, fertigation and feed use.

How the amino acid grades compare

Grade Form Total amino acid Free amino acid Total nitrogen Best for
Salt-Free Amino Acid Liquid 30% Liquid ≥ 300 g/L ≥ 7.0% Chloride-sensitive crops; foliar and drip
50% Hydrolyzed Amino Acid Powder (this product) Powder ≥ 45.0% ≥ 40.0% ≥ 15.0% Cost-efficient foliar and fertigation over large areas
50% Enzymatic Amino Acid Liquid Liquid ≥ 500 g/L 20 – 30 g/L Fertigation and foliar programmes, no dissolving step
60% Hydrolyzed Amino Acid Powder Powder ≥ 60.0% ≥ 55.0% ≥ 12.0% General-purpose foliar, drip and flushing
80% Hydrolyzed Amino Acid Powder — Tank-Mix Powder ≥ 80.0% ≥ 75.0% ≥ 12.5% Liquid NPK and trace-element compounding
80% Amino Acid Powder — Standard Powder ≥ 80.0% ≥ 75.0% ≥ 12.5% Feed premixes, dry blends, straight foliar and soil
90% Hydrolyzed Amino Acid Powder Powder ≥ 90.0% ≥ 85.0% ≥ 15.0% organic N Premium agriculture, feed and cosmetics
90% Enzymatic Amino Acid Powder Powder ≥ 90.0% ≥ 65.0% ≥ 16.0% Peptide-rich; organic and cosmetic specifications

All grades are 100% water soluble and are hydrolysed from plant-source protein. Higher grades carry a larger free amino acid share, so less product is needed per hectare for the same response.

Applications & Dosage

For field crops (wheat, corn, rice, cotton, soybean), cash crops (vegetables, fruit, flowers, tea, medicinal herbs) and greenhouse crops — especially nutrient-demanding blocks such as tomatoes, strawberries, citrus, apples, grapes and leafy vegetables.

Application How to use Rate
Foliar spray Dilute and spray the leaf evenly, front and back, in the morning or the evening. Repeat every 7–10 days, two to three times per growth cycle. 1:500 – 1:800 · 1–2 kg per 1000 L water
Drip / root irrigation Meter into the irrigation line or drench the root zone at the seedling stage and again at fruit expansion. 1:800 – 1:1200 · 7.5–15 kg/ha
Seed soaking Soak the seed for 6–12 hours before sowing, depending on seed size and seed-coat thickness. 1:1000 – 1:1500
On-farm liquid formulation Dissolve in water to make your own liquid amino acid fertiliser; at 100% solubility there is no filtration step. As formulated

Packaging & Storage

Pack size Description
1 kg / 5 kg / 10 kg Printed aluminium foil bag
10 kg / 20 kg Printed carton box
20 / 25 kg Woven or paper bag with inner liner; colour-printed PP/PE bag with inner liner
200 L drum / 1000 L IBC For liquid grades; food-grade HDPE drum with tamper-evident closure
1000 / 1100 kg Jumbo bag with discharge spout

Storage: Store in a cool, dry, well-ventilated place, away from direct sunlight and moisture. Stable for 24 months in the sealed original packaging; reseal opened bags. Liquid grades: store upright and frost-free.

Custom packaging, private-label printing and OEM specifications are available on request. Packaging photos are available in the product gallery.

Successful Cases

Full case studies with crop data are published in our application sectors.

Frequently Asked Questions

Why is the guaranteed value 45% when the product is called a 50% powder?

“50%” is the grade name and reflects the typical analysis of the material. What we guarantee on every batch is the floor in the specification table: ≥ 45.0% total amino acids, ≥ 40.0% free amino acids and ≥ 15.0% total nitrogen. Every lot is tested against those floors and ships with its own COA.

What is the advantage of a plant-source amino acid?

Plant source is the preferred option where the buyer needs a non-animal origin — organic certification, vegan-friendly supply chains, religious or cultural requirements, and markets that restrict animal-derived inputs. It also carries a complementary amino acid profile, notably a higher glutamic acid share, and removes any question of animal disease transmission.

Is it suitable for certified organic farming?

Yes, when produced from certified plant material and by an approved hydrolysis route it is widely accepted by major organic certifiers. Rules differ by market and certifier, so confirm with your own certification body and ask us for the input documentation you need.

How does the rate compare with lower-concentration powders?

At over 45% amino acids the rate is typically 20–30% lower by weight than for a 30–40% amino acid powder for the same agronomic effect. Start from the dilution range in the application table and adjust to your crop, water volume and programme.

Can it be used in fertigation with hard water?

Yes, compatibility is good, but as with any concentrated input it is worth running a jar test with your own water and fertiliser mix before the first full batch so you can see there is no precipitation.

How does it help plants under stress?

The free amino acid fraction includes proline, an osmoprotectant, and glutamic acid, a central compound in nitrogen metabolism. Together they help the plant hold cell function and water status through drought, heat, cold and salinity, and recover faster afterwards.

Is it safe on seedlings and sensitive crops?

Yes, at the recommended dilution it is safe from delicate seedlings through to mature fruit trees. For seed soaking use the weak end of the range and test a small area first on a crop you have not treated before.

Can I make a liquid fertiliser from this powder?

Yes. At 100% water solubility it is the usual choice for on-farm liquid formulation — dissolve the required amount in water and it is ready to use, with no residue to filter out.

Does the product have an odour?

It has a mild, characteristic smell that is normal for a plant protein hydrolysate. There are no artificial masking agents in the formulation.

How is it packed and what is the minimum order?

Standard pack is a 20 kg or 25 kg bag with inner liner, with 1 kg and 10 kg options for sampling and small trials. MOQ one pallet; 7–15 days ex-works. Private-label printing and custom blends are available on request.

Need a quotation or a sample?

Tell us your application, target market and packaging — we will come back with specification, price and lead time.

Request a Quote


FAQ

Frequently Asked Questions

Quick answers on samples, minimum order quantity, specifications, documents and shipping. For anything else, send us a message and we reply within one working day.

We provide free samples for most products. Tell us the product, form (powder, granule, flake or liquid) and target specification, and we will arrange express shipment. Sample lead time is usually 3-5 working days.

MOQ depends on the product and form. Standard powders usually start from 1 ton, while small packs and liquid concentrates can be lower. Tell us your target product and we will quote the exact MOQ.

Yes. Every batch ships with a Certificate of Analysis (COA) and a Material Safety Data Sheet (MSDS). Heavy-metal and key-parameter results are tested in our analytical lab, and we can also supply the documents your registration or customs clearance requires.

We supply humic and fulvic acid, amino acid, and seaweed extract products, covering agriculture, animal nutrition, environmental remediation, water treatment, and human-health applications.

Most products are available as powder, granule, flake or liquid. Standard packing is 25 kg PP/PE bags, jumbo bags, fibre drums or IBC tanks, and we can also pack 1 kg, 5 kg or 20 kg retail sizes for distributors.

Yes. We can adjust the specification (content, pH, solubility, particle size, moisture) and pack under your own brand and artwork. Send us your target specification sheet and we will confirm feasibility, MOQ and lead time.

Standard items ship in 7-15 working days after confirmation. Custom specifications and large volumes may take longer; we will give a firm date together with the quotation.

Our standard terms are 30% T/T deposit with the balance against the copy of the Bill of Lading. Irrevocable L/C at sight and other terms can be discussed for repeat or long-term orders.

We ship from Tianjin, Qingdao and Shanghai by sea, and by air or express for samples and small orders. We normally quote FOB, CIF and CFR, and can also work EXW or DDP on request.

Use the contact form on this page or email us with the product, quantity, target specification and destination port. We reply with a quote and lead time, usually within one working day.

Get In Touch

Send Us A Message

Fill out the form below and we will get back to you as soon as possible.

Related Products

Inquiry

No products available for inquiry at present.

Fill in your information