Welcome to JINGFENG GROUP

JINGFENG GROUP

Welcome to JINGFENG GROUP

  • A1-1001, Taida Xintiandi, Nanhai Road, Binhai New Area, Tianjin, 300457, China

  • +8618920222224

  • Mail Support: graeme@humate-cn.com

  • Mon – Sat: 8:00 am – 6:00 pm (GMT+8)

Amino Acid

60% Hydrolyzed Amino Acid Powder

Key Specifications

Total amino acid : ≥ 60.0%
Free amino acid : ≥ 55.0%
Total nitrogen : ≥ 12.0%
Non-organic nitrogen : 2.0 – 3.0%
pH : 3.0 – 5.0
ISO 9001 : Certified quality management system
Shelf life : 24 months, sealed, 5–35 °C

Amino Acid

60% Hydrolyzed Amino Acid Powder

High Free Amino Acid Share — Absorbed Within 24 Hours

Product code JFHA-AA-P
Total amino acid ≥ 60.0%
Free amino acid ≥ 55.0%
Total nitrogen ≥ 12.0%
pH 3.0 – 5.0

Every lot ships with a Certificate of Analysis stating tested total amino acids, free amino acids, total nitrogen and chloride.

Product Overview

Amino acids are the building blocks of proteins and, in free form, the most readily absorbed nitrogen source a plant or an animal can take up. JINGFENG’s amino acid range is produced from plant protein (soybean) or animal protein by acid or enzymatic hydrolysis, which breaks the protein chain down into free amino acids, short peptides and water-soluble nitrogen. The result is a 100% water-soluble input used as a foliar and fertigation biostimulant, a chelating agent for trace elements, and a feed-grade protein source.

60% Hydrolyzed Amino Acid Powder is the step up from our 50% grade: ≥ 60% total amino acids with ≥ 55% in the free form, ≥ 12% total nitrogen and a pH held between 3.0 and 5.0. It is supplied as a light yellow, fully water-soluble powder under product code JFHA-AA-P.

The point of the grade is the free amino acid share. Free amino acids are single, unbound molecules, so a leaf or a root can take them up directly — there is no waiting for protein to break down in the soil, and no nutrient held up by soil fixation. In practice that shows as a faster response at the moments that matter: seedling establishment, flowering, fruit set and recovery after stress.

It also carries 2.0–3.0% non-organic nitrogen, which supplies a quick-acting fraction to sit alongside the slower amino acid release.

Key Benefits

≥ 55% free amino acids

Most of the ≥ 60% total is already in the free form, so the crop takes it up through the leaf or the root without waiting for a breakdown step.

Dissolves completely

100% water soluble with no residue, so it can go straight into the spray tank or through a drip line.

High free amino acid share

A large part of the load is in the free form, which plants and animals absorb without further breakdown.

Low chloride option

Low-chloride grades avoid salt burn on chloride-sensitive crops and keep the salt load down in feed rations.

Blend-friendly

A free-flowing powder that disperses evenly into NPK, organic fertilizer and feed premixes, even at low inclusion rates.

COA on every batch

Each lot ships with a Certificate of Analysis stating the tested total amino acids, total nitrogen, chloride, pH and density for that batch.

Technical Specification

Parameter Specification Test standard
Appearance Light yellow powder Visual inspection
Total amino acid ≥ 60.0% NY/T 1975-2010
Free amino acid ≥ 55.0% NY/T 1975-2010
Total nitrogen ≥ 12.0% NY/T 1977-2010
Non-organic nitrogen 2.0 – 3.0%
pH 3.0 – 5.0 NY/T 1973-2021

Specification values are guaranteed minimums on a dry basis, taken from the batch Certificate of Analysis and tested against the stated Chinese industry standards. Every shipment travels with its own COA stating the tested values.

Need the full Certificate of Analysis, MSDS, or TDS for your formulation or tender file?

Request COA / MSDS / TDS

Form & Solubility

Form: fine, free-flowing powder with low dust, easy to weigh out by the bag and to blend into dry mixes.

In water: 100% water soluble. It wets out quickly and dissolves cleanly under light agitation, leaving no residue to block filters, spray nozzles or drip lines.

Handling: use standard dust protection when handling bulk. Reseal opened bags to keep moisture out.

What the non-organic nitrogen does. The specification carries 2.0–3.0% non-organic nitrogen alongside the amino acid nitrogen. That fraction is a quick-acting nitrogen source; the amino acid fraction releases more slowly. Together they give an immediate response and a supply that lasts through the flush of growth.

In water: fully water soluble. Stir for one to two minutes so the powder is completely dispersed before the solution goes into the tank or the injector.

Amino acids from plant-source protein hydrolysis — a water-soluble nitrogen and free amino acid source for foliar, fertigation and feed use.

How the amino acid grades compare

Grade Form Total amino acid Free amino acid Total nitrogen Best for
Salt-Free Amino Acid Liquid 30% Liquid ≥ 300 g/L ≥ 7.0% Chloride-sensitive crops; foliar and drip
50% Hydrolyzed Amino Acid Powder Powder ≥ 45.0% ≥ 40.0% ≥ 15.0% Cost-efficient foliar and fertigation over large areas
50% Enzymatic Amino Acid Liquid Liquid ≥ 500 g/L 20 – 30 g/L Fertigation and foliar programmes, no dissolving step
60% Hydrolyzed Amino Acid Powder (this product) Powder ≥ 60.0% ≥ 55.0% ≥ 12.0% General-purpose foliar, drip and flushing
80% Hydrolyzed Amino Acid Powder — Tank-Mix Powder ≥ 80.0% ≥ 75.0% ≥ 12.5% Liquid NPK and trace-element compounding
80% Amino Acid Powder — Standard Powder ≥ 80.0% ≥ 75.0% ≥ 12.5% Feed premixes, dry blends, straight foliar and soil
90% Hydrolyzed Amino Acid Powder Powder ≥ 90.0% ≥ 85.0% ≥ 15.0% organic N Premium agriculture, feed and cosmetics
90% Enzymatic Amino Acid Powder Powder ≥ 90.0% ≥ 65.0% ≥ 16.0% Peptide-rich; organic and cosmetic specifications

All grades are 100% water soluble and are hydrolysed from plant-source protein. Higher grades carry a larger free amino acid share, so less product is needed per hectare for the same response.

Applications & Dosage

For leafy vegetables (lettuce, spinach, Chinese cabbage), fruit crops (peaches, pears, strawberries), grain crops (rice, wheat) and cash crops (tea, medicinal herbs) — from seedling emergence through to harvest.

Application How to use Rate
Foliar spraying Dilute and spray in the morning or the evening, at the seedling stage, at flowering and during rapid growth. Two to three applications per growth cycle. 1:1500 – 1:2000 · 3–5 kg per hectare
Drip irrigation Pre-dissolve and meter into the line at the seedling stage and through fruit expansion; repeat every 7–10 days. 1:1000 – 1:1500 · 6–8 kg per hectare
Seed soaking Soak seed before sowing to lift germination and seedling vigour. 1:2000 · test a small area first
On-farm liquid formulation Dissolve to make your own liquid amino acid fertiliser; fully soluble with no residue. As formulated

Packaging & Storage

Pack size Description
1 kg / 5 kg / 10 kg Printed aluminium foil bag
10 kg / 20 kg Printed carton box
20 / 25 kg Woven or paper bag with inner liner; colour-printed PP/PE bag with inner liner
200 L drum / 1000 L IBC For liquid grades; food-grade HDPE drum with tamper-evident closure
1000 / 1100 kg Jumbo bag with discharge spout

Storage: Store in a cool, dry, well-ventilated place, away from direct sunlight and moisture. Stable for 24 months in the sealed original packaging; reseal opened bags. Liquid grades: store upright and frost-free.

Custom packaging, private-label printing and OEM specifications are available on request. Packaging photos are available in the product gallery.

Successful Cases

Full case studies with crop data are published in our application sectors.

Frequently Asked Questions

How is a hydrolyzed amino acid different from an enzymatic one?

Hydrolysis gives a higher proportion of free amino acids — ≥ 55% here — so the crop absorbs it directly and fast. Enzymatic grades trade some of that free fraction for a much higher peptide content, which acts over a longer window. If you want the quickest visible response per gram, the hydrolyzed grade is the one; if you want the signalling and sustained effect of peptides, look at our enzymatic powders.

Why does the free amino acid share matter?

Free amino acids are small molecules that need no further breakdown, so a leaf or a root takes them up as they are. That matters most at stress recovery and at key stages such as flowering, when the crop cannot wait for mineralisation in the soil.

What does the non-organic nitrogen do?

The 2.0–3.0% non-organic nitrogen is a quick-acting fraction that complements the slower release from the amino acids, so the crop has an immediate supply while the amino acid nutrition carries on through the flush of growth.

Is it suitable for organic farming?

It is made from natural raw materials with no synthetic additives and is widely accepted in organic production. Rules differ by market and certifier, so confirm with your certification body and ask us for the input list and technical data sheet.

What if the powder cakes in the bag?

Crush the cake gently and dissolve it in water. Caking is a moisture effect and does not reduce the nutrient content or the absorption efficiency. Reseal the bag tightly after each use and store it dry.

Can I use it on young seedlings?

Yes. Use the weak end of the foliar range, around 1:2000, and test a small area first. At that dilution it lifts seedling vigour without leaf scorch.

Can it be tank-mixed with pesticides?

It is compatible with most neutral and weakly acidic pesticides. Avoid strong alkaline material above pH 8, and jar-test by mixing 100 mL of diluted product with the pesticide — use it only if there is no precipitation or discolouration.

How should I store it, and what is the shelf life?

Store sealed in a cool, dry, well-ventilated place out of direct sunlight. Shelf life is 24 months from the production date under those conditions.

Do you offer samples and what is the minimum order?

Yes — 1 kg samples are available for testing, dispatched within two working days with a short application guide. The bulk MOQ is 1000 kg, with volume discounts above 10 tons.

Need a quotation or a sample?

Tell us your application, target market and packaging — we will come back with specification, price and lead time.

Request a Quote


FAQ

Frequently Asked Questions

Quick answers on samples, minimum order quantity, specifications, documents and shipping. For anything else, send us a message and we reply within one working day.

We provide free samples for most products. Tell us the product, form (powder, granule, flake or liquid) and target specification, and we will arrange express shipment. Sample lead time is usually 3-5 working days.

MOQ depends on the product and form. Standard powders usually start from 1 ton, while small packs and liquid concentrates can be lower. Tell us your target product and we will quote the exact MOQ.

Yes. Every batch ships with a Certificate of Analysis (COA) and a Material Safety Data Sheet (MSDS). Heavy-metal and key-parameter results are tested in our analytical lab, and we can also supply the documents your registration or customs clearance requires.

We supply humic and fulvic acid, amino acid, and seaweed extract products, covering agriculture, animal nutrition, environmental remediation, water treatment, and human-health applications.

Most products are available as powder, granule, flake or liquid. Standard packing is 25 kg PP/PE bags, jumbo bags, fibre drums or IBC tanks, and we can also pack 1 kg, 5 kg or 20 kg retail sizes for distributors.

Yes. We can adjust the specification (content, pH, solubility, particle size, moisture) and pack under your own brand and artwork. Send us your target specification sheet and we will confirm feasibility, MOQ and lead time.

Standard items ship in 7-15 working days after confirmation. Custom specifications and large volumes may take longer; we will give a firm date together with the quotation.

Our standard terms are 30% T/T deposit with the balance against the copy of the Bill of Lading. Irrevocable L/C at sight and other terms can be discussed for repeat or long-term orders.

We ship from Tianjin, Qingdao and Shanghai by sea, and by air or express for samples and small orders. We normally quote FOB, CIF and CFR, and can also work EXW or DDP on request.

Use the contact form on this page or email us with the product, quantity, target specification and destination port. We reply with a quote and lead time, usually within one working day.

Get In Touch

Send Us A Message

Fill out the form below and we will get back to you as soon as possible.

Related Products

Inquiry

No products available for inquiry at present.

Fill in your information